The K745 Easy series is suitable for welding medium to small areas of thermoplastic plastics. It can weld small products and prevent the internal tiny electronic parts or chips from being damaged by ultrasonic vibration.

Can be installed on special machines and production lines

The fuselage column adopts dovetail groove design, so the whole machine will not deviate during the downward pressure welding process

· Programmable control of five-stage pressure distribution

Graphical welding data curve analysis

Electromagnetic sensor precision travel measurement kit, precision +/-0.01mm

Digitally controlled pressure touch vibration kit

The ultrasonic oscillating element is easy to disassemble, making it convenient to replace the welding head, transducer and amplifier

The welding stroke is precisely controlled by the fine-tuning knob with a precision of 0.01mm

· Four-point base design, equipped with adjustment screws, can quickly adjust the bottom mold level

· Use linear ball bearing guide rails to ensure that the lowering welding mechanism does not shake

CE compliant operation mode

Feature

Value

Power Requirements

220 VAC / 50 - 60 Hz single phase, powered by electrical box

weight

51.5 kg

Press color

red

Frequency Power

35kHz 900W

Safety Standards

Comply with CE safety regulations

switch

Two-hand start button & emergency stop button are located on the front of the press

Drive

Double acting cylinder, Ø40mm

Compressed air demand

Maximum 7 bar, rated 6 bar, at 6 bar, the maximum air consumption per actuation is about 2.5 lt.n

Maximum downforce

745N (when supplied with 6 bar compressed air)

Action mode

The descent speed and braking point can be programmed. The air pressure can be programmed. The welding output power can be precisely adjusted.

Adjustable travel

20-100mm, no need to adjust the height of the machine body

Distance from welding head to column center

170 mm

Applicable electric box

STD35- 900W

Slide rails

The machine head is equipped with a precision linear ball bearing slide rail, and the column adopts a dovetail groove design

Welding tool fixing method

Welding head: locked on the amplifier, with a cover door to fix the bottom mold: fixed with special clamps, T-slots and flange gaskets

Connection plug

All D-sub

Place the space at the right temperature

Operating temperature -5℃ ~ 45℃ / Storage temperature -20℃ ~ 60℃

design

Switzerland