| Feature | Value |
| Input Power Supply | 190 - 265 VAC / 50 - 60 Hz, single phase |
| Size | H 280 x W 125 x L 420 mm |
| Weight | 20kHz 1000W & 2000W: 7.5 kg
20kHz 2000W & 3000W: 8.0 kg
35kHz 600W & 900W: 7.5 kg |
| Color | RAL3020 |
| Display | 4 x 20 Characters with backlight |
| LED Bar | 20 LED with Peak Memory for Output power |
| LED | 4 LED for Status |
| Keyboard | 25 key (plus on/off) |
| Microcontroller Generator | 16 bit / 20 MHz |
| Microcontroller Controller | 16 bit / 20 MHz |
| AD / DA converter | 12 bit |
| Frequency Range | 20kHz: 19700 - 20150 Hz
35kHz: 34700 - 35150 Hz |
| Power Measuring | Real Time |
| Auto Tuning | Real Time |
| Power Loss Measuring | Before , after, off |
| Nominal output power | 20kHz: 1000 / 1500 / 2000 / 3000W
35kHz: 600 / 900W |
| Maximum output power | 10% above nominal power |
| Amplitude Internal | 60 - 100% at 5% steps |
| Amplitude External | 60 - 100% at 5% steps |
| Amplitude measuring | With external Sensor ( Sensor is optional ) |
| Operating mode | Time, Energy, US-Stop, Travel, Power |
| Time Mode | 0.005 - 9.999 s |
| Energy Mode | 0 - 99999.99Ws |
| US-Stop Mode | Integrated |
| Travel Mode | 0 – 500.00mm / Tolerant +/- 0.01mm |
| Power Mode | 0 - 100% |
| Parts & Reject Counter | 0 - 999999999 |
| Trigger Mode | Timer Trigger: 0.000 - 9.999 s
Pressure Trigger: 0 – 6.5 bar |
| Proportional Valve Analog | 0 - 10V |
| Power Output Analog | 0 – 5 V |
| Controller for Welding Press | Dual Palm Button & Pneumatic Press |
| Integrated Power Supply | 24V DC / 400 mA stabilized & short circuit protected |
| Speed reduction over Travel | 0 – 500.00mm |
| Input | Opto coupler 20 - 28 V DC / max. 7 mA |
| Output | Opto coupler 22 - 26 V DC / 250mA |
| Emergency Stop | Message in Display |
| Error Message | Display / Hardware Output |
| Interface for PLC | Various digital Input and Output |
| Interface for PC | RS232 |
| Data Bank | 99 memories |
| Data Bank Selection for External | 4 x Digital / 16 x Digital HEX / RS 232 |
| Software Update | BDE interface |
| Buzzer | Confirmation Of Keyboard & Error Message |
| Connectors | All Standard D-sub |
| Pin code | 4 digit to protect access to parameters |
| Main Power Switch | On the back Panel |
| Language | E,D,SP,F,I,P,S,DK,N,SF,NL,CZ,PL,RO,SLO,H,TR |
| Service Program | Hardware Test for all Input & Output |
| Temperature | -5°C ~ 45°C / stock -20°C ~ 60°C |
| Design & Production | Switzerland |
