apsonic K3000 Advanced Ultrasonic welding machine
The ultrasonic welding press K3000 Advanced is suitable for welding operations of thermoplastic parts from medium to large size. Suitable for the assembly into special purpose machines or automation Dove-tail main column, no deflection during stroke movement Easy tool changing, only need one wrench for replacement Welding travel can be adjusted by vernier screw. Accuracy: 0.01mm 4-corner base with screws for horizontal adjustment Heavy-loading roller rail is used, no deflection during downward stroke There are optional travel measurement unit, pressure trigger unit, and digital controll for raising quality and effeciency CE operating mode is available
| | |
| | |
Feature | Value | Input Power Supply | 220 VAC / 50 - 60 Hz , Single Phase, Supplied from generator | Size | H 1066 - 1340 x W400 x D 750 mm | Weight | 114 kg without generator | Color | RAL3020, other color is upn request. | Display | Pressure Gauge | Frequency Range | 20 kHz: 19700 - 20150 Hz | Safety | CE standard | Switches | Dual-palm buttons with Emergency Stop at front | Drive Type | Pneumatic double acting air cylinder Ø80mm | Drive Energy | Compressed air supply: 7 bar maximum, 6 bar nominal Max. consumption at 6 bar: approx. 8 IIN/ stroke | Maximum Force | 3000N at 6 bar compressed air | Stroke Movement | Fast advance, short braking and gentle set down | Maximum Travel | 100mm | Throat Depth | 220 mm | Space Requirement | Table approx. 1500x 800 mm, height 750mm | Height Adjustment | 280 mm | Generator | ADV 20-2000W; ADV20-3000W; | Rail | Precision Anti-creep crossed roller rails on the actuator Dovetail rails on the column | Horizontal Adjustment | Horn/ anvil using the table top with 4 horizontal adjusting nuts | Too Fitting | Horn: Screwed with boosted and clamped using swing door Anvil: With special clamping jaw and T-slot, flange | Pressure Trigger (Optional) | Ultrasonic triggering using differential pressure sensor TIP002 is required | DTM (Optional) | Adcanced digital travel measurement system. Accuracy ± 0.01 mm TIP002 is required | Connectors | All Adcanced D-sub | Temperature | -5°C ~ 45°C / Stock -20°C ~ 60°C | Design | Switzerland |
|