K745 High End

作者:灵科超声波apsonic 浏览: 发表时间:2021-12-08 10:39:06

apsonic K745 High End Ultrasonic welding machine

The ultrasonic welding press K745 High End Ultrasonic press is suitable for welding operations of thermoplastic parts from medium to large size.

  • Suitable for the assembly into special purpose machines or automation
  • Dove-tail main column, no deflection during stroke movement
  • Easy tool changing, only need one wrench for replacement
  • Welding travel can be adjusted by vernier screw. Accuracy: 0.01mm
  • 4-corner base with screws for horizontal adjustment
  • Heavy-loading roller rail is used, no deflection during downward stroke
  • There are optional travel measurement unit, pressure trigger unit, and digital controll for raising quality and effeciency
  • CE operating mode is available





FeatureValue
Input Power Supply220 VAC / 50 - 60 Hz , Single Phase, Supplied from generator
SizeH 1066 - 1340 x W400 x D 750 mm
Weight114 kg without generator
ColorRAL3020, other color is upn request.
DisplayPressure Gauge
Frequency Range20 kHz: 19700 - 20150 Hz
SafetyCE standard
SwitchesDual-palm buttons with Emergency Stop at front
Drive TypePneumatic double acting air cylinder Ø80mm
Drive EnergyCompressed air supply: 7 bar maximum, 6 bar nominal Max. consumption at 6 bar: approx. 8 IIN/ stroke
Maximum Force3000N at 6 bar compressed air
Stroke MovementFast advance, short braking and gentle set down
Maximum Travel100mm
Throat Depth220 mm
Space RequirementTable approx. 1500x 800 mm, height 750mm
Height Adjustment280 mm
Generator

STD20- 1500W;STD20- 2000W;STD20- 3000W;

RailPrecision Anti-creep crossed roller rails on the actuator Dovetail rails on the column
Horizontal AdjustmentHorn/ anvil using the table top with 4 horizontal adjusting nuts
Too FittingHorn: Screwed with boosted and clamped using swing door
Anvil: With special clamping jaw and T-slot, flange
Pressure Trigger (Optional)Ultrasonic triggering using differential pressure sensor
TIP002 is required
DTM (Optional)Standard digital travel measurement system. Accuracy ± 0.01 mm
TIP002 is required
ConnectorsAll standard D-sub
Temperature-5°C ~ 45°C / Stock -20°C ~ 60°C
DesignSwitzerland



友情链接

COPYRIGHT © 2020 by apsonic China  粤ICP备13004144号  

添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了