K745 Standard

作者:灵科超声波apsonic 浏览: 发表时间:2021-12-08 11:11:13

apsonic K745 Standard Ultrasonic welding machine

The ultrasonic welding press K745 Standard  is suitable for welding operations of thermoplastic parts of small size. This machine is more suitable for small welding parts with tiny electrical parts or chips inserted.

  • Suitable for the assembly into special purpose machines or automation
  • Dove-tail main column, no deflection during stroke movement
  • Easy tool changing, only need one wrench for replacement
  • Welding travel can be adjusted by vernier screw. Accuracy: 0.01mm
  • 4-corner base with screws for horizontal adjustment
  • Linear roller rail is used, no deflection during downward stroke
  • There are optional travel measurement unit, pressure trigger unit, and digital controll for raising quality and effeciency
  • CE operating mode is available

Input Power Supply220 VAC / 50 - 60 Hz , Single Phase, Supplied from generator
SizeH 886 - 1066 x W 316 x D 525 mm
Weight44 kg without generator
ColorRAL3020, other color is upn request.
DisplayPressure Gauge
Frequency Range35 kHz: 34700 - 35150 Hz
SafetyCE standard
SwitchesDual-palm buttons with Emergency Stop at front
Drive TypePneumatic double acting air cylinder Ø80mm
Drive EnergyCompressed air supply: 7 bar maximum, 6 bar nominal Max. consumption at 6 bar: approx. 2.5 IIN/ stroke
Maximum Force745N at 6 bar compressed air
Stroke MovementFast advance, short braking and gentle set down
Maximum Travel100mm
Throat Depth170 mm
Space RequirementTable approx. 1500x 800 mm, height 750mm
Height Adjustment180 mm

STD35- 900W;

RailStandard linear roller rails on the actuator
Dovetail rails on the column
Horizontal AdjustmentHorn/ anvil using the table top with 4 horizontal adjusting nuts
Too FittingHorn: Screwed with boosted and clamped using swing door
Anvil: With special clamping jaw and T-slot, flange
Pressure Trigger (Optional)Ultrasonic triggering using differential pressure sensor
TIP002 is required
DTM (Optional)Standard digital travel measurement system. Accuracy ± 0.01 mm
TIP002 is required
ConnectorsAll standard D-sub
Temperature-5°C ~ 45°C / Stock -20°C ~ 60°C


COPYRIGHT © 2020 by apsonic China  粤ICP备13004144号