Apsonic K745 Easy Ultrasonic welding machine
The ultrasonic welding press K745 Easy is suitable for welding operations of thermoplastic parts of small size. This machine is more suitable for small welding parts with tiny electrical parts or chips inserted. - Suitable for the assembly into special purpose machines or automation
- Dove-tail main column, no deflection during stroke movement
- Easy tool changing, only need one wrench for replacement
- Standard integrated magnetic sensors. Accuracy ± 0.01 mm
- Piezo power gauge for pressure trigger
- Easy tool changing, only need one wrench for replacement
- Welding travel can be adjusted by vernier screw. Accuracy: 0.01mm
- 4-corner base with screws for horizontal adjustment
- Heavy-loading roller rail is used, no deflection during downward stroke
- CE operating mode is available
|
| |
|
|
|
Feature | Value | Input Power Supply | 220 VAC / 50 - 60 Hz , Single Phase, Supplied from generator | Size | H 886 - 1066 x W 316 x D 525 mm | Weight | 44 kg without generator | Color | RAL3020, other color is upn request. | Frequency Range | 35 kHz: 34700 - 35150 Hz | Safety | CE standard | Switches | Dual-palm buttons with Emergency Stop at front | Drive Type | Pneumatic double acting air cylinder Ø80mm | Drive Energy | Compressed air supply: 7 bar maximum, 6 bar nominal Max. consumption at 6 bar: approx. 2.5 IIN/ stroke | Maximum Force | 745N at 6 bar compressed air | Stroke Movement | Fast advance, short braking and gentle set down Force profile is programmable Welding power output is adjustable | Maximum Travel | 100mm | Throat Depth | 170 mm | Space Requirement | Table approx. 1500x 800 mm, height 750mm | Height Adjustment | 180 mm | Generator | HE35- 900W | Rail | Standard linear roller rails on the actuator Dovetail rails on the column | Horizontal Adjustment | Horn/ anvil using the table top with 4 horizontal adjusting nuts | Too Fitting | Horn: Screwed with boosted and clamped using swing door Anvil: With special clamping jaw and T-slot, flange | Connectors | All standard D-sub | Temperature | -5°C ~ 45°C / Stock -20°C ~ 60°C | Design | Switzerland |
|